Driver for Zebra TLP 3844-Z
Table of Contents
The official driver for the Zebra TLP 3844-Z printer is essential for the initial connection of the device to a computer and for reinstallation of the Windows operating system. This driver enables the system to recognize the printer for subsequent use and allows for configuration and printing. The installation process is automated and should proceed without issues; however, a computer restart is required after installation to apply the changes.
You can download the driver for the Zebra TLP 3844-Z compatible with your operating system version from the table below. We also recommend reviewing the installation guide.
Download Driver for Zebra TLP 3844-Z
| OS Versions: Windows 11, Windows 10 (32-bit and 64-bit), Windows 8.1 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows 7 (32-bit and 64-bit) | |
| Driver Type | Download |
| Zebra Setup Utilities for Windows Recommended driver installation and configuration utility (v1.1.9.1325). | |
| Windows Printer Driver v5 Version 5.1.17.7414 Use this driver if you need to use either CPCL or EPL printer command languages. | |
On this page, you can download the Zebra TLP 3844-Z driver! Download the necessary drivers for your Windows, Linux, or Mac operating system for free.
How to Install the Driver for Zebra TLP 3844-Z
- Download the driver from the table for your Windows OS version.
- Run the downloaded file.
- Accept the “License Agreement” and click “Next.”
- Specify how you will connect the printer to your computer and click “Next.”
- Wait for the installation to complete.
- Restart your computer for the changes to take effect.
Before installing the driver, ensure that no other version is installed on your computer. If one is installed, please remove it before proceeding with the new installation.
Common Errors and Solutions During Driver Installation
- Printer Detection Issue: If the device is not found, we recommend downloading a different version of the driver.
- Printing Issues: If the printer does not print after driver installation, ensure that you have restarted your computer.
- Cannot Launch Driver File: If the file does not open, please scan your system for viruses, then restart and try again.