Driver for Samsung SL-T1672DW Series PCL-3
Table of Contents

The official driver for the Samsung SL-T1672DW Series PCL-3 printer is essential for the initial connection of the device to the computer and for reinstalling the Windows operating system. This driver ensures that the printer is properly recognized by the system, allowing for setup and printing. The installation process is automated and straightforward. After installation, a computer restart is recommended to apply the changes.
To download the driver for Samsung SL-T1672DW Series PCL-3 suitable for your operating system version, please refer to the table below. After downloading, it’s advisable to review the installation instructions.
Download Driver for Samsung SL-T1672DW Series PCL-3
OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
Driver Type | Download |
Printing & Scan Driver (SL-T167xDW Series) |
On this page, you can download the Samsung SL-T1672DW Series PCL-3 driver! Get the necessary drivers for free for Windows, Linux, and Mac operating systems.

How to Install the Driver for Samsung SL-T1672DW Series PCL-3
- Download the driver from the table for your version of Windows OS Windows
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify how to connect the printer to your computer and click “Next”
- Wait for the installation to complete
- Restart your computer to apply the changes.


Before installing the driver, ensure that no other version is already installed on your computer. If so, remove it before installing the new one.
Common Errors and Solutions During Driver Installation
- Printer detection issue: If the device is not found, it is advisable to download a different version of the driver.
- Printing problems: If the printer does not print after installing the driver, ensure that you have restarted your computer.
- Unable to launch the driver file: If the file fails to open, check your system for viruses, then restart and try again.