Driver for Samsung CF-4750H
Summary
You can download the official driver for the Samsung CF-4750H multifunction device from our website for Windows operating systems. First, determine your version of Windows and its architecture, then use the table to download the necessary driver.
After downloading the driver for the Samsung CF-4750H, we highly recommend reviewing the detailed installation instructions to avoid possible issues. If you encounter problems, please refer to the “Common Errors and Solutions during Driver Installation” section.
Download Driver for Samsung CF-4750H
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| CF-4750 Print Driver | |
| CF-4750 Scan Driver | |
On this page, you can download the Samsung CF-4750H driver! Download the required drivers for Windows, Linux, and Mac for free.
How to Install the Driver for Samsung CF-4750H
- Download the driver from the table for your version of Windows Windows
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify how you will connect the printer to the computer and click “Next”
- Wait for the installation to complete
- Reboot your computer to apply changes.
Before installing the driver, ensure that no other version is installed on your computer. If it is, remove it before proceeding with the new installation.
Common Errors and Solutions during Driver Installation
- MFP Detection Issue: If the device is not found, we recommend downloading a different version of the driver.
- MFP Problems: If the multifunction device does not scan or print after driver installation, ensure you have rebooted your computer.
- Unable to Run the Downloaded Driver File: If the file won’t open, scan your system for viruses, confirm that you have the correct OS version, then reboot and try again.