Driver for Plustek OpticPro ST960
Summary
You can download the official driver for the Plustek OpticPro ST960 scanner directly from our website without registration. First, identify the required version of the Windows operating system for the driver, then use the table below to proceed with the download.
Once the download is complete, you can refer to the installation instructions. We recommend following each step closely to avoid errors. In case of issues, please review the “Common Errors and Solutions During Driver Installation” section.
Download Driver for Plustek OpticPro ST960
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| Plustek OpticPro ST960 Driver | |
On this page, you can download the Plustek OpticPro ST960 driver! Download the necessary drivers for Windows, Linux, Mac operating systems for free.
How to Install the Driver for Plustek OpticPro ST960
- Download the driver from the table for your version of Windows OS
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify how the printer is connected to the computer and click “Next”
- Wait for the installation to complete
- Restart your computer to apply changes.
Before installing the driver, ensure that no other version is already installed on your computer. If so, remove it before installing the new one.
Common Errors and Solutions during Driver Installation
- Scanner Detection Issue: If the device is not found, try downloading a different version of the driver.
- Scanning Problems: If the scanner does not function after installation, ensure that you have restarted your computer.
- Unable to Launch the Downloaded Driver File: If the file does not open, check your system for viruses and verify the correct OS version; then restart and try again.