Driver for Plustek OpticPro ST48
Summary
You can download the official driver for the Plustek OpticPro ST48 scanner directly from our website without registration. First, determine which version of the Windows operating system you need the driver for. Then, using the table below, proceed to download the driver.
After successfully downloading, you can review the installation instructions. We recommend following each step carefully to avoid errors. In case of any issues, refer to the “Common Errors and Solutions During Driver Installation” section.
Download Driver for Plustek OpticPro ST48
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| Plustek OpticPro ST48 Driver | |
On this page, you can download the Plustek OpticPro ST48 driver for free! Download the necessary drivers for Windows, Linux, and Mac operating systems.
How to Install the Driver for Plustek OpticPro ST48
- Download the driver from the table for your version of Windows OS
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify how the printer is connected to the computer and click “Next”
- Wait for the installation to complete
- Restart your computer to apply changes.
Before installing the driver, ensure that no other version is installed on your computer. If there is, please uninstall it before proceeding with the new installation.
Common Errors and Solutions During Driver Installation
- Scanner detection issues: If the device is not found, try downloading a different version of the driver.
- Scanning problems: If the scanner does not function after driver installation, ensure that you have restarted your computer.
- Unable to run the downloaded driver file: If the file does not open, check your system for viruses and verify the OS version, then restart and try again.