Driver for Plustek OpticPro S96
Table of Contents
You can download the official driver for the Plustek OpticPro S96 scanner directly from our website without registration. First, determine which version of the Windows operating system you need the driver for, and then proceed to download using the table provided below.
After downloading successfully, you can refer to the installation guide. We strongly recommend following each step closely to avoid errors. If you encounter issues, please check the “Common Installation Errors and Solutions” section.
Download Driver for Plustek OpticPro S96
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| Plustek OpticPro S96 Driver | |
On this page, you can download the Plustek OpticPro S96 driver! Download necessary drivers for Windows, Linux, and Mac operating systems for free.
How to Install the Driver for Plustek OpticPro S96
- Download the driver from the table corresponding to your version of Windows OS
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify how the printer will connect to your computer and click “Next”
- Wait for the installation to complete
- Restart your computer to apply the changes.
Before installing the driver, ensure that no other version is installed on your computer. If one exists, please remove it before proceeding with the new installation.
Common Installation Errors and Solutions
- Scanner Detection Issue: If the device is not found, try downloading a different version of the driver.
- Scanning Problems: If the scanner does not scan after installation, ensure that you have restarted your computer.
- Unable to Launch the Downloaded Driver File: If the file does not open, check your system for viruses and verify that the OS version is correct. Then, restart and try again.