Driver for Mustek ScanMagic 4830S
Table of Contents
The official driver for the Mustek ScanMagic 4830S scanner is available for download on our website without registration, compatible with the Windows operating system. Before downloading, ensure you know the version and architecture of Windows required for the driver, then use the provided table to obtain the correct driver.
After downloading the driver, we recommend reviewing the installation instructions to avoid potential issues. Please follow each step carefully to prevent errors, and if problems arise, refer to the section “Common Errors and Solutions during Driver Installation”.
Download Driver for Mustek ScanMagic 4830S
| Supported OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| Mustek ScanMagic NT Driver | |
On this page, you can download the Mustek ScanMagic 4830S driver! Get the necessary drivers for Windows, Linux, and Mac free of charge.
How to Install the Driver for Mustek ScanMagic 4830S
- Download the driver from the table for your version of Windows
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify the method of connecting the printer to the computer and click “Next”
- Wait for the installation to complete
- Restart your computer to apply the changes.
Before installing the driver, ensure that no other version is already installed on your computer. If it is, please remove it before installing the new one.
Common Errors and Solutions during Driver Installation
- Scanner detection issue: If the device is not found, try downloading an alternative driver version.
- Scanning problems: If the scanner fails to scan after driver installation, ensure you have rebooted your computer.
- Unable to launch the downloaded driver file: If the file does not open, check your system for viruses and verify the OS version, then reboot and try again.