Driver for Lexmark XM1242
Summary
The official driver for the Lexmark XM1242 multifunction device is available for download from our website for Windows operating systems. First, please identify your Windows OS version and architecture, then refer to the table to download the appropriate driver.
After downloading the driver for the Lexmark XM1242, we strongly recommend reviewing the detailed installation instructions to prevent potential issues. If problems arise, please refer to the section titled “Common Errors and Solutions During Driver Installation.”
Download the Driver for Lexmark XM1242
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| Lexmark Printer Software G3 Drivers (Print and Scan) | |
On this page, you can download the Lexmark XM1242 driver! Get the necessary drivers for Windows, Linux, and Mac for free.
How to Install the Driver for Lexmark XM1242
- Download the driver from the table for your Windows OS version Windows
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify how the printer is connected to your computer and click “Next”
- Wait for the installation to complete
- Restart your computer to apply the changes.
Before installing the driver, make sure no other version is installed on your computer. If there is, please remove it before proceeding with the new installation.
Common Installation Errors and Solutions
- Device Detection Issues: If the device is not found, we recommend downloading a different version of the driver.
- Functionality Problems: If the multifunction device cannot scan or print after driver installation, ensure you have restarted your computer.
- Unable to Launch the Downloaded Driver File: If the file does not open, check your system for viruses and verify that you have the correct OS version, then restart and try again.