Driver for Lexmark X9350
Table of Contents
Download the official driver for the Lexmark X9350 multifunction device from our website for Windows operating systems. First, determine your version of Windows and its architecture, then use the table to download the necessary driver.
After downloading the driver for the Lexmark X9350 MFP, we strongly recommend reading the detailed installation instructions to avoid potential issues. If problems arise, refer to the “Common Errors and Solutions When Installing the Driver” section.
Download Driver for Lexmark X9350
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| Imaging Device Driver x64bit | |
| Imaging Device Driver x32bit | |
On this page, you can download the Lexmark X9350 driver! Download the necessary drivers for Windows, Linux, and Mac free of charge.
How to Install the Driver for Lexmark X9350
- Download the driver from the table corresponding to your version of Windows
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Select the printer connection method and click “Next”
- Wait for the installation to complete
- Restart your computer to apply changes.
Before installing the driver, ensure that a previous version is not already installed on your computer. If it is, uninstall it before proceeding with the new installation.
Common Errors and Solutions When Installing the Driver
- Device Not Found Issue: If the multifunction device is not detected, we recommend downloading an alternative version of the driver.
- MFP Issues: If the multifunction device fails to scan or print post-installation, ensure that your computer has been restarted.
- Driver File Won’t Open: If the downloaded file won’t open, check your system for viruses and confirm that the correct OS version is being used, then restart and try again.