Driver for Lexmark X762e MFP
Contents
You can download the official driver for the Lexmark X762e MFP multifunction device from our website without registration. Before downloading, make sure to identify your version of Windows and its architecture, then download the required driver using the table below.
After downloading the driver for the Lexmark X762e MFP, we strongly recommend reviewing the detailed installation instructions to avoid any issues. If problems occur, please refer to the “Common Installation Errors and Solutions” section.
Download the Driver for Lexmark X762e MFP
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| Lexmark ScanBack Utility to create Scan To PC profiles | |
| Network Scan Driver for Windows | |
| C760/762 Windows and Server 2003 PostScript (System Driver) | |
On this page, you can download the Lexmark X762e MFP driver! Download the necessary drivers for Windows, Linux, or Mac free of charge.
How to Install the Driver for Lexmark X762e MFP
- Download the driver from the table for your Windows OS version Windows
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify the method of connecting the printer to your computer and press “Next”
- Wait for the installation to complete
- Restart your computer to apply changes.
Before installing the driver, ensure that no other version is installed on your computer. If one exists, uninstall it before proceeding with the new installation.
Common Errors and Solutions during Driver Installation
- Device detection issue: If the multifunction device is not found, we recommend downloading a different version of the driver.
- Device problems: If the multifunction device cannot scan or print after driver installation, ensure you have restarted your computer.
- Unable to launch the downloaded driver file: If the file does not open, check your system for viruses and ensure the correct OS version is being used, then reboot and try again.