Driver for Lexmark M1246
Content Summary
This is the official driver for the Lexmark M1246 printer. With the correct driver, Windows can recognize the printer, enabling printing capabilities. Additionally, setup software is commonly included to assist with device configuration, whether it’s a multifunction device or a printer.
You can download the driver for the Lexmark M1246 from the table below. Before doing so, please confirm your Windows operating system version and architecture. Installing the driver is straightforward, and detailed installation instructions are provided, so we highly recommend following them.
Download Driver for Lexmark M1246
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| Lexmark Printer Software G3 Drivers (Print and Scan) | |
On this page, you can download the Lexmark M1246 driver! Download the necessary drivers for Windows, Linux, Mac for free.
How to Install the Driver for Lexmark M1246
- Download the driver for your Windows OS version from the table below.
- Run the downloaded file.
- Accept the “License Agreement” and click “Next.”
- Specify how the printer is connected to the computer and click “Next.”
- Wait for the installation to complete.
- Restart your computer to finalize the changes.
Before installing the driver, ensure that no other version is installed on your computer. If one is present, remove it before proceeding with the new installation.
Common Errors and Solutions During Driver Installation
- Printer detection issue: If the device is not found, try downloading a different version of the driver.
- Printing problems: If the printer does not print after installing the driver, ensure that you have restarted your computer.
- Driver file won’t open: If the file does not open, scan your system for viruses, then restart and try again.