Driver for Lexmark CX622
Table of Contents
Download the official driver for the Lexmark CX622 multifunction device from our website for the Windows operating system. First, determine your Windows OS version and architecture, then use the table to download the required driver.
After downloading the driver for the Lexmark CX622, we highly recommend reading the detailed installation instructions to avoid any issues. In case of problems, please refer to the “Common Installation Errors and Solutions” section.
Download Driver for Lexmark CX622
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| Lexmark Printer Software G2 Drivers (Print and Scan) | |
On this page, you can download the Lexmark CX622 driver! Download the necessary drivers for Windows, Linux, and Mac for free.
How to Install the Driver for Lexmark CX622
- Download the driver from the table for your version of Windows
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify how you will connect the printer to the computer and click “Next”
- Wait for the installation to complete
- Restart your computer to apply the changes.
Before installing the driver, ensure that no other version is installed on your computer. If so, uninstall it before proceeding with the new installation.
Common Errors and Solutions During Driver Installation
- Device Detection Issue: If the multifunction device is not found, we recommend downloading a different version of the driver.
- Device Malfunction: If the multifunction device fails to scan or print after driver installation, ensure that you have restarted your computer.
- Cannot Launch Downloaded Driver File: If the file does not open, check your system for viruses and verify that the OS version is correct. Then restart and try again.