Драйвер для Lexmark Z35 Color Jetprinter
  • Virus check:
  • Added: 16.02.2024
  • OS versions: Windows 11, 10, 8, 7, Vista-XP
  • Driver version: v 3.0.1.0
  • Manufacturer: Lexmark
  • License: Free

Driver for Lexmark 6500

Table of Contents
  1. Purpose of the Driver
  2. Download Driver for Lexmark 6500
  3. How to Install the Driver
  4. Common Installation Errors and Solutions

Lexmark 6500

You can download the official driver for the Lexmark 6500 multifunction device from our website for Windows operating systems. First, determine your Windows OS version and architecture, then use the table to download the required driver.

After downloading the Lexmark 6500 multifunction printer driver, we strongly recommend reviewing the detailed installation instructions to avoid potential issues. If problems arise, please refer to the “Common Errors and Solutions for Driver Installation” section.

Download Driver for Lexmark 6500

Supported OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit
Driver Type Download
Complete Postscript Level 3 Emulation Universal Fax drivers and software
Download
Universal Postscript Level 3 Emulation – Fax
Download
Universal Print Driver Installation Package v2 (3.0.1.0)
Download
Network Scan driver for multifunction devices
Download
On this page, you can download the Lexmark 6500 driver! Download the necessary drivers for Windows, Linux, and Mac operating systems for free.

Installing the driver for Lexmark 6500

How to Install the Lexmark 6500 Driver

  1. Download the driver corresponding to your Windows OS version from the table above.
  2. Run the downloaded file.
  3. Accept the “License Agreement” and click “Next.”
  4. Specify how you will connect the printer to your computer and click “Next.”
  5. Wait for the installation to complete.
  6. Restart your computer to apply the changes.

Installing the driver for Lexmark 6500 step 1

Installing the driver for Lexmark 6500 step 2

Before installing the driver, ensure that no other version is installed on your computer. If one is found, please uninstall it before proceeding with the new installation.

Common Errors and Solutions for Driver Installation

  • MFU Detection Issue: If the device is not detected, it is advisable to download a different version of the driver.
  • MFU Problems: If the multifunction device fails to scan or print after driver installation, ensure that your computer has been restarted.
  • Unable to Launch the Downloaded Driver File: If the file does not open, check your system for viruses, verify that the correct OS version is being used, then restart and try again.
Сatalog of drivers: Printer, Scanner, and MFP Drivers
0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments