Driver for HP Designjet Z6200 42-in Photo Production

The official driver for the HP Designjet Z6200 42-in Photo Production printer is essential for the initial connection of the device to the computer and in case of a Windows operating system reinstall. This driver allows the system to recognize the printer for subsequent use, configuration, and printing. The installation process is automated and should not present any issues; however, a system reboot is necessary afterward to apply the changes.
You can download the driver for the HP Designjet Z6200 42-in Photo Production for the specific version of your operating system from the table below. We recommend reviewing the installation instructions after downloading the driver.
Download Driver for HP Designjet Z6200 42-in Photo Production
OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
Driver Type | Download |
HP DesignJet and PageWide XL Windows Printer Driver Installer | |
HP DesignJet and PageWide XL PCL3 Driver for Windows | |
HP Print and Scan Doctor for Windows | |
HP DesignJet Utility |

How to Install the Driver for HP Designjet Z6200 42-in Photo Production
- Download the driver from the table for your Windows OS version.
- Run the downloaded file.
- Accept the “License Agreement” and click “Next.”
- Specify how you will connect the printer to the computer and click “Next.”
- Wait for the installation to complete.
- Restart your computer to apply the changes.


Common Installation Errors and Solutions
- Printer detection issue: If the device cannot be found, consider downloading another version of the driver.
- Printing issues: If the printer does not print after the driver installation, make sure you have rebooted your computer.
- Unable to launch the driver file: If the file does not open, run a virus check on your system, then reboot and try again.