Driver for HP Designjet T1200 44-in PostScript Version
Summary
The official driver for the HP Designjet T1200 44-in PostScript Version is essential for the initial connection of the device to a computer and when reinstalling the Windows operating system. This driver ensures correct printer identification by the system and facilitates configuration and printing. The driver installation is automated and straightforward. After installation, it is recommended to reboot your computer to apply the changes.
To download the driver for the HP Designjet T1200 44-in PostScript Version compatible with your operating system, please refer to the table below. After downloading the driver, it’s advisable to review the installation instructions.
Download Driver for HP Designjet T1200 44-in PostScript Version
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| HP Designjet T1200/T770 series HP-GL/2 and HP RTL driver | |
| HP Designjet T1200/T770 series HP-GL/2 and HP RTL installer | |
| HP Designjet T1200ps/T770+PostScript accessory series PostScript installer | |
| HP Instant Printing application | |
On this page, you can download the driver for HP Designjet T1200 44-in PostScript Version! Download the necessary drivers for Windows, Linux, and Mac operating systems for free.
How to Install the Driver for HP Designjet T1200 44-in PostScript Version
- Download the driver from the table that matches your version of Windows
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify how the printer connects to the computer and click “Next”
- Wait for the installation to complete
- Reboot your computer to apply the changes.
Before installing the driver, ensure that no other version is installed on your computer. If one is present, please remove it before proceeding with the new installation.
Common Errors and Solutions During Driver Installation
- Printer detection issue: If the device is not found, we recommend downloading a different driver version.
- Printing issues: If the printer does not print after driver installation, confirm that you have restarted the computer.
- Cannot open driver file: If the file does not launch, check your system for viruses, then reboot and try again.