Driver for Canon LBP-2410
Summary
The official driver for the Canon LBP-2410 printer is essential when first connecting the device to a computer and during Windows operating system reinstallations. This driver enables the system to recognize the printer for configuration and printing tasks. The installation process is automatic and should not present any issues, but make sure to restart your computer post-installation for the changes to take effect.
You can download the driver for the Canon LBP-2410 compatible with your version of the operating system from the table below. After downloading, we recommend reviewing the installation instructions.
Download Driver for Canon LBP-2410
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| Printer Driver R1.10 | |
On this page, you can download the Canon LBP-2410 driver! Download the necessary drivers for Windows, Linux, and Mac operating systems free of charge.
How to Install the Driver for Canon LBP-2410
- Download the driver from the table for your version of Windows
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify how to connect the printer to the computer and click “Next”
- Wait for the installation to finish
- Restart your computer to apply the changes.
Before installing the driver, ensure that no other version is installed on your computer. If so, remove it before installing the new version.
Common Issues and Solutions When Installing the Driver
- Printer Detection Issue: If the device is not found, try downloading a different version of the driver.
- Printing Problems: If the printer does not print after installation, ensure that you have restarted your computer.
- Driver File Won’t Launch: If the file won’t open, check your system for viruses, then restart and try again.
- All-in-One Device Detection Issue: If the device is not found, try downloading a different version of the driver.
- All-in-One Device Problems: If the multifunction device does not scan or print after driver installation, ensure that you have restarted your computer.
- Downloaded Driver File Won’t Launch: If the file won’t open, check your system for viruses and ensure that your OS version is correct, then restart and try again.