Driver for Canon Color imageRUNNER LBP5975
Table of Contents
You can download the official driver for the Canon Color imageRUNNER LBP5975 multifunction device from our website for Windows operating systems. First, identify your version and architecture of Windows, then use the table to download the necessary driver.
After downloading the driver for the Canon Color imageRUNNER LBP5975, we strongly recommend reviewing the detailed installation guide to avoid potential issues. If problems arise, refer to the section “Common Errors and Solutions during Driver Installation”.
Download Driver for Canon Color imageRUNNER LBP5975
| OS Versions: Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit | |
| Driver Type | Download |
| PPD V4.90 | |
| UFR II/UFRII LT V4 Printer Driver V7.1.2 | |
| Generic PCL6, ver. 3.11 | |
| PCL6 V15.00 | |
| PostScript 3 V15.00 | |
| UFRII V15.00 | |
On this page, you can download the Canon Color imageRUNNER LBP5975 driver! Get the required drivers for Windows, Linux, and Mac for free.
How to Install the Driver for Canon Color imageRUNNER LBP5975
- Download the driver from the table according to your version of Windows
- Run the downloaded file
- Accept the “License Agreement” and click “Next”
- Specify how you will connect the printer to the computer and click “Next”
- Wait for the installation to complete
- Restart your computer to apply the changes.
Before installing the driver, ensure that no other version is installed on your computer. If there is, remove it before installing the new one.
Common Installation Errors and Solutions
- Device Not Detected: If the multifunction device is not found, we recommend downloading a different version of the driver.
- MFU Issues: If the multifunction device does not scan or print after the driver installation, ensure that you have restarted your computer.
- Can’t Launch Driver File: If the file won’t open, scan your system for viruses, check that the OS version is correct, then restart and try again.